Maxim-integrated 78Q8430 Linux Driver ARM Platform Uživatelský manuál stáhnout pdf (Strana 16)

78Q8430 Linux Driver ARM Platform User Guide UG_8430_008

16 Rev. 1.0

2.2 ethtool Command Syntax

The following syntax summary lists the ethtool version 4 command options supported by the 78Q8430

device driver. ethtool can be obtained from: http://sourceforge.net/projects/gkernel/.

The EEPROM modification command described below requires a code conveyed by the 'magic' operand.

The required code is 8430.

~# ethtool -h Displays command syntax (as shown below).

ethtool version 4

Usage:

ethtool DEVNAME Display standard information about device.

ethtool -i|--driver DEVNAME Show driver information.

ethtool -e|--eeprom-dump DEVNAME Do an EEPROM dump.

[ offset N ]

[ length N ]

ethtool -E|--change-eeprom DEVNAME Change bytes in device EEPROM.

[ magic 8430]

[ offset N ]

[ value N ]

2.3 mii-tool Command Syntax

The following syntax summary lists the mii-tool version 4 command options supported by the 78Q8430

device driver. mii-tool can be obtained from: http://www.metux.de/pub/mii-tool/mii-tool-1.9.1.1.tar.bz2.

~# mii-tool

Usage: mii-tool [-VvRrwl] [-A media,... | -F media] [interface ...]

-R, --reset Reset MII to power on state.

-F, --force=media Force specified media technology.

media: 100baseT4, 100baseTx-FD, 100baseTx-HD,

10baseT-FD, 10baseT-HD,

(to advertise both HD and FD) 100baseTx, 10baseT

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22

Žádné komentáře

Maxim-integrated 78Q8430 Linux Driver ARM Platform Uživatelský manuál Strana 16