Maxim-integrated 73M1822/73M1922 Modem CTL Application Uživatelský manuál stáhnout pdf (Strana 10)

73M1822/73M1922 Modem CTL Application User Guide UG_1x22_056

10 Rev. 1.0

2.3.2 Answer Command

The answer command manually answers an incoming call by bringing the FXO channel off-hook. This

command is manually issued by the user when the RING event is detected.

Syntax

1X22CTL:NN> answer (answer call on current active

channel)

1X22CTL:NN> answer <XX> (answer call on channel ID XX)

Where: XX 00 to 15 decimal represent the channel ID.

NN Shows the current active channel ID.

The following is a log of the command to answer incoming call on channel 0, and channel 3.

Figure 6: Answer Command Logging Session

2.4 Set Active Channel Command

NOTE: Current 73M1x22 HW Module only supports one channel (0).

The channel command sets the current active channel to a specific channel ID.

Syntax

1X22CTL:NN> channel <XX>

Where: XX New desired active channel ID – 00 to 15 (decimal).

NN Shows the current active channel ID.

The following is a log of the command to set new active channel ID to channel 5.

Figure 7: Set Active Channel Logging Session

Modem CTL:00>

RING(0)

answer

Answer call on current active channel: 0.

Modem CTL:00>

RING(3)

answer 3

Answer call on channel: 3.

Modem CTL:00>

Modem CTL:00> channel 5

Set active channel to 5.

Modem CTL:05>

Incoming RING on channel 0.

Manually answer current

active channel (0).

Incoming RING on channel 3.

Manually answer channel 3.

Command prompt changed

to active channel id of 05.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 20 21

Žádné komentáře

Maxim-integrated 73M1822/73M1922 Modem CTL Application Uživatelský manuál Strana 10